Home Network 2 MP IP Bullet Camera
Wired option
Decide where you want to place the IP camera then measure the distance back to your broadband router. Always allow a bit more cable than you need, when you know the required cable length select this in the drop down box above and click the 'BUY' button. This IP camera kit sends the 12v power down the weatherproof Cat5e cable through a POE Injector (included) which requires a mains socket close to your router, so there is no need for power outside. The network IP camera will need setting up via an App which is really quite simple to do, we recommend to do this before you install and full instructions are included. You can watch and record your IP camera live from anywhere using your IOS or Android device, you can even view on your home PC or MAC using a suitable software download.Part Wireless option
If you don't want to run a long cable you may be able to use Passthrough Powerline Plug-in Adaptors, these are available at additional cost.
The powerline plug-ins are a good alternative to cabling and a great way to stream high definition IP cameras upto
300 meters, but you will need to make sure outdoor and household plugs are on the same ring main.
You can plug your IP camera cable into one Powerline adapter ideally located in your garage or shed mains power socket.
Next, plug the receiving Powerline adapter into another mains plug where an Ethernet cable can reach your router.
It really is just plug and play!
Note: If you use these adapters the supplied POE injector will need to provide power to the camera from the Powerline
adapter closest to the camera and not at the broadband router end.
Mini IP 2MP Camera Kit includes:
- 2MP IP Camera
- Cat5e External RJ45 Cable (select length above)
- POE Injector
- Weatherproof box
- Instructions
Mini IP Bullet Camera Features:
- Resolution 2MP (1920x 1080) POE
- Fixed 4mm Lens, Viewing Angle 86.5°(H)
- Smart IR, Up To 30m IR Range
- Anti-Reflection Design To Improve IR Effectiveness
- Day/Night, IR Cut Filter, 3D DNR
- WDR, OSD, Triple Streams
- Privacy Mask, Motion Mask, ROI, 9:16 Corridor Format Support
- Supports H.264, H.265 or Ultra 265
- ONVIF Compliance (Profile S)
- Temperature Range -30°C to 60°C
- Wide Voltage Range (±25%)
- Metal Housing, IP67 Rated
Camera
- Image Sensor: Aptina CMOS (1/2.7")
- Resolution: 2MP
- Effective Pixels (H x V): 1920 x 1080
- TV System: PAL / NTSC
- Shutter Speed: Auto/Manual, 1/6~1/100000s
- Signal-to-noise Ratio: ≥52dB
- Iris: Electronic
- Back Light Compensation: Via OSD Menu
- Wide Dynamic Range: dWDR
- Digital Noise Reduction: 2D/3D
- Gain Control: Auto
- Sync Mode: Internal
- White Balance: Auto/Manual
- Lens: Fixed 4mm Lens
- Field of View: 86.5°
- Scanning: Progressive Scan
- Onboard Recording: No
Day / Night
- IR Cut Filter (Smart IR)
- IR Range: 25-30m
- IR Control: CDS Auto
Network
- Ethernet Cabled RJ45 10/100
- Supported Protocols: IPv4,IGMP,ICMP,ARP,TCP,UDP,DHCP, RTP,RTSP,RTCP,DNS,DDNS,NTP,FTP,UPnP,HTTP,HTTPS,SMTP,SSL
- ONVIF: Supports ONVIF (Profile S)
- POE: Yes
- Main Stream: 1920 x 1080 @ 25fps
- Sub Stream: 1280 x 720 @ 15fps
General
- Power: POE injector included. (optional 12V DC input)
- Housing: Metal
- Power Consumption:Max 5.5W
- Operating Temperature: -30°C ~ +60°C
- Operating Humidity: 10% - 95% RH
- Ingress Protection: IP67
- Approvals: CE / FCC
- Weight: 450g
- Dimensions: L 163 x Dia 63 mm

Select Cable Length: | 10 Metres |
---|
-
Setting up your UNV Camera
EZLive App download and UNV camera set up
pdf, 102.98 KB -
Setting Up EZStation on a PC or MAC
EZStation software allows you to view your camera on a PC or MAC
pdf, 543.09 KB -
EzStation user Manual for PC and MAC
EZStation 3.0 instructions for PC & MAC view
pdf, 4.66 MB